Español, Français, and
Other Languages |
|
|
|
|
|
Klenk® Offset Snips
New shorter handles make Klenk's offset snips easier to use!
Shorter handles on our offset snips give you more precise control. Handles are only 4-1/2" when fully open, yet you still get a complete cut. And with the new softer grip on the upper handle, the snips are more comfortable. Unique blade design allows blades to glide smoothly through the metal, handling straight cuts, tight curves, angles, and circles more easily than any other aviation snip -- keeps hands up and away from metal surface.
- Thicker alloy steel blades increase strength and add durability.
- Improved forming process produces stress-free blades that resist breakage.
- Improved heat-treating process produces blades that are tougher and more wear-resistant.
- Precision-ground tips meet together evenly to prevent fishhooks, burrs, and tearing at the end of each cut.
- Stronger Grade 8 pivot bolt adds strength.
- New shorter handles with softer grip on upper handle gives you ergonomic, reducing hand fatigue.
|
|
Model # MA75200
Klenk Offset Aviation Snips, LEFT/STRAIGHT CUT
Length |
Cut Length |
Cut Direction |
Weight (lbs) |
10-1/2" |
1-3/8" |
LEFT |
1.060 |
|
|
|
|
Model # MA75210
Klenk Offset Aviation Snips, RIGHT/STRAIGHT CUT
Length |
Cut Length |
Cut Direction |
Weight (lbs) |
10-1/2" |
1-3/8" |
RIGHT |
1.060 |
|
|
|
 Klenk® Bulldog Snips
Traditional Bowed Handles
- Hardened, serrated blades with a short bite to cut heavier gauge metal
- Ideal for ‘S’ slips and drives, T-bar, and extruded aluminum frames
- Handles are only 5'' apart when fully open, yet Klenk bulldog snips still give you a complete 3/4'' cut
- Cutting capacity: 16 ga. CR - 18 ga. SS.
|
|
Model # MA74500
Klenk Bulldog Snips
Length |
Cut Length |
Cut Direction |
Weight (lbs) |
9" |
3/4" |
STRAIGHT |
0.760 |
|
|
|
 Klenk® Siding Snips
Original Style Handles
- Heavy-duty, industrial-quality -- specially designed for steel, aluminum and vinyl siding work
- Long alloy steel blades, heat-treated for hardness
- Serrated blades draw work into cutting edge without slipping for accurate, clean cuts
- Longer leverage, spring action handles
- Fine points for cutting in close to siding locks and rolled edges
- Cutting capacity: 18 ga. CR.
|
|
Model # MA72000
Klenk
Siding snip
Length |
Cut Length |
Cut Direction |
Weight (lbs) |
13" |
2-1/4" |
STRAIGHT |
1.380 |
|
|
|
Model # MA72010
Klenk
Siding snip
Length |
Cut Length |
Cut Direction |
Weight (lbs) |
10-1/2" |
1-1/2" |
STRAIGHT |
0.920 |
|
|
|
|
